Standard Tolerance Information

HomeEngineering DataStandard Tolerance Information
Standard Tolerance Information 2017-10-06T15:44:42+00:00

Standoffs and Spacers

Aluminum, Brass, Steel & Stainless Steel:

  • Lengths up to and including 6″ (inches) the tolerance is +/-.005
  • Lengths over 6″ (inches) the tolerance is +/-.010
  • Lengths up to and including 99 mm (millimeters) the tolerance is +/-.13 mm
  • Lengths from 100 mm to 150 mm the tolerance is +/-.20 mm
  • Lengths over 150 mm the tolerance is +/-.25 mm

Tolerances for the outside diameters are +/-.005.

Phenolic, Nylon, Teflon, and Delrin:

  • For all lengths, the tolerance is +/-.010
  • For the outside diameter, the tolerance is +/-.010

How Can We Help You? Request Samples Or A Quote

RAF Electronic Hardware is your one-stop reliable source. If you need additional information on our products, service, samples or anything else, give us a call to speak with a representative. You can also request quotes or samples online to skip the phone call for fast delivery.

Request A Quote
Request A Sample

Contact Us

  • This field is for validation purposes and should be left unchanged.