Table of Properties for Metallic Materials

HomeEngineering DataTable of Properties for Metallic Materials
Table of Properties for Metallic Materials 2017-10-06T15:44:52+00:00

Properties Metallic Materials

Note: Information listed above was obtained from charts of various manufacturers and is intended for comparison of materials only. RAF assumes no obligation or liability in using the above material or product for a specific application.

PROPERTIES ALUMINUM 2011-T3 QQ-A-225/3 ALUMINUM 6061-T6 QQ-A-225/8 BRASS ASTM-B-16 HALF HARD STEEL 12L14 STEEL 1215 STAINLESS STEEL 303
Tensile Strength (psi) 55,000 45,000 50,000 78,000 78,000 90,000
Shear Strength (psi) 41,000 37,700 36,000 45,000 45,000 67,000
Elongation (%) 20 17 30 30 30 55
Modules of Elasticity (psi) 10,600,000 10,000,000 15,000,000 30,000,000 30,000,000 28,000,000
Hardness RB75 RB60 RB77 RB63 RB63 RB90
Specific Gravity 2.77 2.7 8.46 7.85 7.85 7.9
Melting Point (°F) 1180 1180 1660-1715 2765 2765 2600-2680
Electrical Conductivity (% of Copper) 30 30 26 12 12 2.4
Thermal Conductivity (BTU/hr/ft²/°F/ft) 70 70 70 34 34 10
Coef. Of Thermal Expansion (in/in°F) 12.9 13.1 10.2 6.5 6.5 9.6
Specific Heat (BTU/lb/°F)) 0.23 0.23 0.09 0.11 0.11 0.12

How Can We Help You? Request Samples Or A Quote

RAF Electronic Hardware is your one-stop reliable source. If you need additional information on our products, service, samples or anything else, give us a call to speak with a representative. You can also request quotes or samples online to skip the phone call for fast delivery.

Request A Quote
Request A Sample

Contact Us

  • This field is for validation purposes and should be left unchanged.